SANY OEM 60352190 Pin, Dowel – Precision Alignment Component for Heavy Duty Engines
60352190
Pin, Dowel
Штифт, дюбель
Clavito, clavija
OEM 60352190 – The genuine SANY parts Pin, Dowel is a precision‑ground, hardened steel locating pin used for accurate alignment of mating components in SANY heavy‑duty diesel engines. With reference 60352190, this dowel pin ensures correct positioning of the cylinder head, timing gear housing, rocker lever support assemblies, and other critical engine parts. Manufactured from high‑carbon bearing steel with case‑hardened surface, the 60352190 dowel pin provides exceptional shear strength and wear resistance. It is a direct OEM replacement for Actlon tippers, SY mining trucks, concrete mixers, and all SANY equipment powered by D09, D12, D13, WP12, and WP13 engines. Trust the authentic 60352190 component to guarantee proper assembly alignment and prevent premature failure of bolted joints.
Pin, Dowel
Установочный штифт
Pasador Cilíndrico de Precisión
60352190 Pin, Dowel – Critical Precision Locating Dowel for SANY Engine Assemblies
The dowel pin with OEM number 60352190 is a small but critically important component in SANY D09, D12, D13, WP12, and WP13 diesel engines.
It is used to precisely align two mating parts – such as the cylinder head to the cylinder block, or a rocker support assembly to the cylinder head.
The dowel pin ensures that bolt holes and fluid passages line up correctly, preventing misassembly that could lead to leaks, component damage, or engine failure.
Genuine SANY dowel pins are manufactured from high‑carbon chromium bearing steel (SAE 52100 / 100Cr6) and case‑hardened to a surface hardness of 58–62 HRC.
The outer diameter is precision ground to a tolerance of ±0.005 mm, providing an interference or close‑fit engagement with the receiving bore.
Both ends are chamfered to facilitate easy insertion during assembly and to prevent damage to the mating bores.
The 60352190 dowel pin also helps to absorb shear loads that would otherwise be carried solely by the clamping bolts, increasing the fatigue life of the joint.
In SANY engines, dowel pins are used in the cylinder head, flywheel housing, timing cover, and rocker lever support assemblies.
Every genuine pin is 100% inspected for hardness, diameter, length, and straightness using automated optical gauges.
A missing or damaged dowel pin can cause catastrophic misalignment, leading to broken bolts, gasket failures, and internal engine collisions.
Precision Ground
Diameter tolerance ±0.005 mm ensures precise interference or close‑fit alignment.
Case Hardened
Surface hardness 58–62 HRC resists galling and wear during assembly and engine operation.
High Shear Strength
Bearing steel construction provides exceptional resistance to shear loads and fretting.
Chamfered Ends
Both ends chamfered for easy installation and to prevent bore damage.
Technical Specifications – OEM 60352190 Pin, Dowel
| OEM Number | 60352190 |
|---|---|
| Product Name | Pin, Dowel – Solid Cylindrical Dowel Pin |
| Material | High‑carbon chromium bearing steel (SAE 52100 / 100Cr6) |
| Heat Treatment | Case hardened and tempered, surface 58–62 HRC, core 25–35 HRC |
| Nominal Diameter | 10.000 mm (common size for SANY rocker support alignment) |
| Diameter Tolerance | m6 (+0.009 / +0.004) or h6 tolerance depending on application |
| Length | 25.0 mm ±0.15 mm (standard version for cylinder head alignment) |
| Chamfer | 1.0 mm × 45° (both ends) |
| Surface Finish | Ground to Ra ≤ 0.2 µm, light oil coating for corrosion protection |
| Compatible Engines | SANY D09, D12, D13, WP12, WP13 series |
Why Genuine SANY 60352190 Dowel Pin Is Superior to Aftermarket Pins
Aftermarket dowel pins are often made from low‑carbon steel without proper heat treatment, resulting in a soft surface that can be deformed or galled during installation.
A soft or undersized pin will not provide the required alignment accuracy, leading to component misalignment and premature gasket or bolt failure.
The genuine 60352190 dowel pin is manufactured from premium bearing steel and case‑hardened to a surface hardness of 58–62 HRC, ensuring it retains its shape and precision under high clamping loads.
Aftermarket pins frequently have poor diameter control, with tolerances that can vary by as much as ±0.05 mm, causing loose or stuck fitment.
Genuine SANY dowel pins are ground to a tight tolerance of ±0.005 mm, guaranteeing a consistent interference or clearance fit as designed by SANY engineers.
Another issue with aftermarket pins is the lack of chamfering or poor chamfer geometry, which can damage the bore edges during assembly.
The 60352190 pin features precision‑machined 45° chamfers on both ends to guide insertion and protect the housing bore.
Using genuine SANY dowel pins is essential for maintaining the structural integrity of bolted joints in cylinder heads, flywheel housings, and timing gear covers.
- Bearing steel with certified heat treatment – 58–62 HRC surface hardness.
- Precision ground OD within ±0.005 mm – perfect alignment every time.
- Chamfered ends prevent bore damage and facilitate easy assembly.
- High shear strength – prevents bolt loosening and joint failure.
- Supplied in SANY original packaging with traceable batch code.
- Direct OEM fit for Actlon trucks, SY excavators, concrete mixers, and wheel loaders.
Compatibility & Installation Information
The 60352190 dowel pin is compatible with SANY D09, D12, D13, WP12G460E50, and WP13G500E30 diesel engines.
It is used in Actlon 6×4/8×4 tippers, SY331, SY412, SY425 mining dump trucks, SYM3310 series, concrete mixer trucks, wheel loaders, motor graders, and STC truck cranes.
Typical applications include aligning the cylinder head to the cylinder block, rocker lever support assemblies to the cylinder head, and timing gear covers to the front housing.
Before installation, ensure the receiving bore is clean, dry, and free of burrs. Apply a thin film of clean engine oil to the dowel pin surface.
Press the dowel pin into the bore using a soft‑faced hammer or arbor press until the pin bottoms out. The pin should be flush or slightly recessed.
Never reuse a dowel pin that has been removed – the interference fit may be compromised, and the pin may have been deformed.
Replace all dowel pins whenever the cylinder head or rocker assembly is removed. Use only genuine SANY pins to guarantee correct fit and alignment.
SANY Original Quality
Every 60352190 dowel pin meets SANY’s material, hardness, and precision standards.
Traceable Packaging
Each pin labeled with OEM 60352190, heat lot number, and production date code.
Global Availability
Stocked at authorized SANY parts centers for immediate delivery worldwide.
Online Catalog of SANY Parts
Learn MoreIf you have any questions about our products, services, or anything related to what we offer, please don’t hesitate to leave us a message—our dedicated team is always ready to provide prompt and helpful responses to address your concerns. What’s more, when you become our valued customer, we’re delighted to offer you complimentary catalog services, giving you access to detailed, up-to-date information on our full range of products, specifications, and offerings to help you make informed decisions.
