SANY 60272960 Washer Seal – Leak-Proof Sealing for High-Pressure Fluid Systems
60272960
Washer, Seal
Шайба, уплотнитель
Arandela, junta
OEM: 60272960
The heavy-duty SANY parts reference 60272960 corresponds to the genuine Washer, Seal – a critical sealing component designed to prevent fluid leakage and contamination ingress in SANY heavy-duty truck engines, fuel systems, and hydraulic assemblies.
With OEM number 60272960, this replacement part guarantees exact fitment and factory-grade sealing performance. The washer seal is precision-engineered to create a reliable barrier between mating surfaces, ensuring leak-proof connections in high-pressure fluid circuits, including fuel delivery systems, power take-off units, and engine block assemblies.
Manufactured from high-quality materials designed to withstand extreme operational conditions, the 60272960 washer seal offers excellent resistance to fuel, oil, coolant, and other industrial fluids. Its innovative design maintains sealing integrity under dynamic pressures, temperature variations, and vibration loads, preventing costly leaks that can compromise system performance.
60272960 Washer Seal – Critical Sealing Component for SANY Fuel and Hydraulic Systems
The washer seal 60272960 is an essential sealing component utilized across multiple SANY equipment systems, including the Low Pressure Fuel Pipe Group and the Power Take-off Group. In the SANY Low Pressure Fuel Pipe Group, the 60272960 washer seal ensures leak-proof connections at critical junctions, working in concert with precision pipes, pipe clamps, and specialized screw components to maintain optimal fluid flow while preventing leaks and ensuring system integrity under various operational conditions.
Within the SANY Power Take-off Group, the 60272960 washer seal complements advanced lubrication management systems, maintaining effective fluid containment and preventing contamination ingress, significantly enhancing the durability and extending the maintenance intervals of the entire assembly. The engineering excellence of these SANY systems ensures reliable performance in the most demanding operating conditions, with the 60272960 washer seal playing an integral role in preserving system integrity.
Designed to withstand high torque loads, repetitive stress cycles, and extreme temperature variations, the 60272960 washer seal maintains its sealing effectiveness across a wide range of operating conditions. Its innovative design prevents fluid migration and environmental contamination ingress, ensuring consistent performance throughout its service life.
Technical Specifications – OEM 60272960 Washer, Seal
| Parameter | Value / Description |
|---|---|
| OEM Number | 60272960 |
| Product Name | Washer, Seal |
| Brand | SANY (Genuine OEM) |
| Material | Copper alloy / NBR (Nitrile Butadiene Rubber) composite |
| Hardness (Shore A) | 80 ± 5 |
| Inner Diameter (approx.) | 10.0 mm ±0.1 mm |
| Outer Diameter (approx.) | 18.0 mm ±0.2 mm |
| Thickness | 1.5 mm ±0.1 mm |
| Max Operating Pressure | 300 Bar (30 MPa) |
| Temperature Range | -40°C to +150°C |
| Fluid Compatibility | Diesel fuel, engine oil, hydraulic fluid, coolant, grease |
| Seal Type | Static face seal / crush washer design |
| Applicable Assemblies | Low Pressure Fuel Pipe Group, Power Take-off Group, Engine Block Group |
| Quantity per Assembly | 12 units (Fuel Pipe Group) / 4 units (PTO Group) |
Key Engineering Advantages – 60272960 Washer Seal
- Precision-engineered sealing surface for leak-proof connections
- Copper alloy construction provides excellent crush resistance
- NBR sealing element ensures superior fluid compatibility
- Drop-in replacement for original SANY part number 60272960
- Maintains sealing integrity under extreme pressure and temperature
- Full traceability with batch number and material certification
- 100% dimensional inspection and sealing performance verification
- Resistant to vibration-induced loosening and compression set
- Extends service intervals by preventing fluid loss and contamination
- Corrosion-resistant surface treatment for harsh environments
Equipment Compatibility & Vehicle Applications
The genuine Washer, Seal (OEM 60272960) is a critical sealing component utilized across multiple SANY heavy-duty systems. It is extensively employed in the SANY Low Pressure Fuel Pipe Group, which ensures reliable and efficient fuel transfer throughout the engine’s low-pressure circuit in heavy-duty machinery. Within this system, the 60272960 washer seal ensures leak-proof connections at all critical junctions, maintaining optimal fuel flow while preventing leaks and ensuring system integrity under various operational conditions.
The 60272960 washer seal is also a core component in the SANY Power Take-off Group, which represents a robust and precision-engineered power transmission system designed to efficiently transfer mechanical energy from the primary engine to auxiliary equipment in heavy-duty machinery. Within this assembly, the washer seal maintains effective fluid containment and prevents contamination ingress, significantly enhancing the durability and extending the maintenance intervals of the entire assembly.
The engineering excellence of these SANY systems ensures reliable performance in the most demanding operating conditions, with the 60272960 washer seal playing an integral role in preserving system integrity. In the Low Pressure Fuel Pipe Group, the 60272960 washer seal works in conjunction with precision pipes, pipe clamps, and specialized screw components to create a comprehensive fluid delivery solution. In the Power Take-off Group, the seal works alongside high-strength bolts, double end studs, and specialized lubrication management systems to ensure long-term operational reliability.
Installation & Maintenance Guide for 60272960
Proper installation of the 60272960 washer seal is essential for ensuring leak-proof sealing and long-term reliability. Before installation, thoroughly clean both sealing surfaces using a non-abrasive solvent to remove any debris, old sealant, or corrosion. Inspect the washer seal for any signs of damage, deformation, or material defects before proceeding with installation.
Position the 60272960 washer seal squarely onto the bolt or fitting thread, ensuring it is centered before tightening. For applications involving hollow screws (such as those in the Low Pressure Fuel Pipe Group), verify that the washer seal is properly oriented to allow fluid flow while maintaining the seal. Use a calibrated torque wrench to tighten the fastener to the manufacturer’s specification, avoiding over-tightening which can crush the sealing element.
For standard M10 threaded applications utilizing the 60272960 washer seal, the recommended torque specification is 25–30 Nm. After final torque application, perform a leak test by pressurizing the system to operating pressure and inspecting the sealed connection for any signs of fluid seepage. The sealing element is designed to provide a fluid-tight barrier under normal operating conditions when properly torqued.
Routine inspection intervals of 2,000 operating hours are recommended for critical systems utilizing the 60272960 washer seal. Check for signs of fluid leakage, seal compression set, or material degradation during scheduled maintenance. If any seepage is detected or if the washer seal shows signs of cracking, flattening, or corrosion, replace it immediately with a new genuine 60272960 component. The washer seal is designed as a single-use component and should never be reused after removal, as the compression set of the sealing element may no longer provide effective sealing.
When performing system disassembly that involves 60272960 washer seals, always replace all seals in the affected circuit rather than reusing existing ones. This practice ensures maximum reliability and prevents premature leakage due to seal wear or compression set. Maintain a small inventory of genuine 60272960 washer seals in your service vehicle for field repairs to minimize equipment downtime.
Always verify the part number 60272960 printed on the original packaging. Authentic SANY washer seals feature the SANY logo and batch traceability code for quality assurance. For precise dimensional verification before installation, please contact your SANY parts supplier with your specific equipment model and application details.
Quality Assurance – SANY Genuine 60272960
Every Washer, Seal (OEM 60272960) is produced in SANY’s IATF 16949 certified manufacturing facilities, meeting the highest international standards for automotive and heavy machinery components. Each batch undergoes rigorous quality control, including dimensional inspection using precision measurement equipment, hardness verification of the sealing surface, and material composition analysis to ensure compliance with copper alloy and NBR specifications.
Material certificates are fully traceable to original supplier batch numbers, providing complete transparency for fleet maintenance and quality auditing. Each 60272960 washer seal is manufactured to tight dimensional tolerances, ensuring proper fitment and sealing performance across a wide range of SANY applications. The copper alloy construction provides excellent crush resistance and resilience, while the NBR sealing element ensures superior fluid compatibility with diesel fuel, engine oil, hydraulic fluid, and coolant.
Sealing performance validation testing has proven that the 60272960 washer seal maintains leak-proof sealing for over 5,000 operational hours when installed and torqued correctly. The sealing element design resists compression set and maintains its elastic properties across the full operating temperature range. Choose genuine SANY sealing components to protect your equipment investment and maintain factory sealing specifications.
Global stock availability – ready for immediate dispatch. Each 60272960 washer seal is individually packed in moisture-proof packaging with a certificate of conformance. Upgrade your heavy machinery sealing systems with genuine SANY components, ensuring optimal fluid containment and extended equipment reliability. For assistance with part identification or to confirm compatibility with your specific SANY equipment model, our team is ready to provide prompt and professional support.
Online Catalog of SANY Parts
Learn MoreIf you have any questions about our products, services, or anything related to what we offer, please don’t hesitate to leave us a message—our dedicated team is always ready to provide prompt and helpful responses to address your concerns. What’s more, when you become our valued customer, we’re delighted to offer you complimentary catalog services, giving you access to detailed, up-to-date information on our full range of products, specifications, and offerings to help you make informed decisions.
