Cylinder Head Gasket 160102130004A095 | SANY Genuine Parts
160102130004A095
Cylinder Head Gasket
Прокладка головки блока цилиндров
Junta de culata
OEM 160102130004A095 – The genuine SANY parts Cylinder Head Gasket delivers uncompromised engine sealing for heavy-duty construction trucks and mining equipment. Engineered precisely for SANY powertrains, this gasket prevents compression leaks, oil contamination, and coolant mixture, ensuring maximum thermal efficiency. Trust the authentic 160102130004A095 component to restore factory compression ratios and prolong engine life under extreme loads. SANY original design guarantees perfect fitment and outstanding durability.
Cylinder Head Gasket
Прокладка головки блока цилиндров
Junta de la Culata
160102130004A095 Cylinder Head Gasket – Engineered for Extreme Conditions
The cylinder head gasket with reference 160102130004A095 is a direct-fit replacement for SANY heavy-duty trucks, wheel loaders, and crawler excavators. Manufactured using advanced multi-layer steel (MLS) technology, this gasket ensures superior sealing between engine block and cylinder head. With high-resistance elastomer coatings, it withstands extreme cylinder pressures up to 220 bar and temperatures fluctuating from -40°C to 450°C. By choosing the authentic 160102130004A095, you eliminate premature gasket failures that commonly cause costly downtime.
Every gasket stamped with 160102130004A095 undergoes strict quality control, including thermal cycle testing and compression recovery validation. Whether you operate in mining, logistics, or construction, this sealing component matches original SANY factory specs precisely. The optimized bead design provides consistent clamp load even after repeated thermal expansion, reducing the risk of head gasket leaks over extended service intervals.
High-Temp Stability
Proven performance at 450°C peak, retains elasticity & seal integrity.
Compression Control
Precise fire ring design ensures optimal compression ratio & reduced blow-by.
Anti-Corrosion Layer
Fluorocarbon rubber coating protects against coolant & chemical attack.
Direct Fitment
Plug-and-play replacement for SANY D09, D12, D13 engine series.
Technical Specifications of 160102130004A095 Cylinder Head Gasket
| OEM Part Number | 160102130004A095 |
|---|---|
| Product Name | Cylinder Head Gasket (MLS design) |
| Brand | SANY (Genuine OEM) |
| Material | Multi-Layer Steel (3 layers) + Viton® coating |
| Gasket Thickness | 1.55 mm (±0.05 mm) |
| Bore Diameter | Ø 126 mm (fits 12L–13L engines) |
| Compression Ratio Range | 16.5 : 1 ~ 18.2 : 1 |
| Operating Temperature | -40°C to +450°C (peak) |
| Pressure Resistance | Up to 22 MPa (3200 psi) |
| OEM Interchange | 160102130004A095, also equivalent to 160102130004 |
Why Choose Genuine SANY Parts for Your Heavy Machinery
Aftermarket head gaskets might compromise on materials and dimensional accuracy, leading to premature combustion leaks. Genuine SANY parts bearing the 160102130004A095 OEM number are engineered with precise embossing and elastomer beading that matches the engine block’s micro-finish. This eliminates hot spots and ensures uniform clamping force across all cylinders. By investing in authentic components, you extend engine overhaul intervals and maintain resale value.
Additionally, SANY’s quality management system (ISO 9001:2015) validates each batch of gaskets with dynamic engine simulation tests. The 160102130004A095 gaskets feature a unique non-stick coating that prevents micro-welding even after long idle periods. No other aftermarket brand delivers the same level of reliability under abrasive dust and high vibration environments.
- 100% Factory-sealed, traceable lot number
- Up to 35% longer service life vs. generic alternatives
- Perfect sealing for turbocharged & aftercooled engines
- Extended warranty when installed by certified workshops
- Global availability for SANY equipment fleets
Compatibility & Application Scope – 160102130004A095
Designed primarily for SANY heavy-duty commercial vehicles and construction machinery, the 160102130004A095 cylinder head gasket perfectly fits the following engine families: SANY D12 (12-liter six-cylinder), D13 (12.9L), and WP12/WP13 platforms used in SANY Actlon series trucks, SY335, SY375, SY485 excavators, and SR235 rotary drilling rigs. Moreover, it serves as a direct upgrade replacement for earlier gasket revisions, ensuring improved fire ring durability.
Thanks to its advanced coating, this gasket is also compatible with engines operating on biodiesel blends (up to B20) and low-sulfur diesel without degradation. For fleet managers seeking to minimize unplanned repairs, standardizing on 160102130004A095 reduces inventory complexity while guaranteeing original equipment fit. Always verify engine serial number, but this part covers the majority of SANY models from 2016 onward.
| Compatible Models | SANY SY335H, SY375H, SY485H, SY500H; Actlon 6×4, 8×4 dump trucks; STC series truck cranes; SR280R drilling rig |
|---|---|
| Engine Series | SANY D12, D13, WP12G460E50, WP13G500E30 |
| Application | Mining haulers, concrete mixers, excavators, wheel loaders, motor graders |
Installation & Maintenance Best Practices
Proper installation of the 160102130004A095 cylinder head gasket is essential to achieve factory-level sealing. Always clean the cylinder head and block deck surfaces thoroughly, removing all old gasket residues and carbon deposits. Check flatness with a precision straightedge; any distortion beyond 0.05mm must be corrected. Lubricate new head bolts according to SANY torque sequence (three-step angular tightening pattern). Re-torque after the first heat cycle for optimal clamping force on the MLS layers.
Do not apply any additional sealant — the 160102130004A095 features integrated rubber beadings that self-seal upon torque. Following replacement, monitor coolant levels and perform a combustion leak test after 50 operating hours. Regular maintenance of cooling system (using SANY-approved antifreeze) further extends the lifespan of this gasket. With correct installation, the genuine 160102130004A095 can exceed 12,000 working hours even in the harshest environments.
100% Quality Tested
Every gasket (160102130004A095) is 100% leak-tested with helium mass spectrometry.
Global Logistics
Expedited shipping for SANY parts warehouses worldwide. Reduce downtime.
Technical Support
Torque specs and installation bulletins available for certified workshops.
Online Catalog of SANY Parts
Learn MoreIf you have any questions about our products, services, or anything related to what we offer, please don’t hesitate to leave us a message—our dedicated team is always ready to provide prompt and helpful responses to address your concerns. What’s more, when you become our valued customer, we’re delighted to offer you complimentary catalog services, giving you access to detailed, up-to-date information on our full range of products, specifications, and offerings to help you make informed decisions.
