SANY Genuine 60326538 Pulling Rivet – Heavy Duty Fastening for Truck Body & Chassis
60326538
Rivet, Pulling
Заклепка, вытягивание
Remache, tracción
OEM 60326538 – The genuine SANY parts Pulling Rivet (also known as blind rivet) is engineered for high‑strength structural connections in SANY heavy trucks, dump bodies, and chassis components. With reference 60326538, this rivet provides a permanent, vibration‑resistant joint without access to the rear side. Manufactured from zinc‑plated steel with a hardened mandrel, the 60326538 rivet delivers consistent clamp force and shear strength. It secures floor panels, crossmembers, and mounting brackets on Actlon tippers, SY mining trucks, and concrete mixers. Trust the authentic 60326538 component to eliminate loose fasteners and corrosion‑related failures.
Pulling Rivet
Вытяжная заклепка
Remache de Tracción
60326538 Pulling Rivet – High‑Strength Blind Fastening for SANY Commercial Vehicles
The pulling rivet with OEM number 60326538 is a direct replacement for SANY’s original fasteners used in cab mounting, floor panel attachment, and sidewall assembly. This blind rivet features a large flange head and a break‑stem mandrel that expands the body uniformly. Unlike standard rivets, 60326538 is manufactured from SAE 1008 steel with a trivalent zinc plating (480h salt spray resistance). The rivet body has a hardness of 70–90 HRB, while the mandrel reaches 48–52 HRC, ensuring clean break and consistent set.
Genuine 60326538 rivets are tested for shear strength (minimum 4.5 kN) and tensile strength (minimum 3.8 kN) per ISO 14589. This makes them suitable for structural joints that experience high vibration and shock loads in off‑road conditions. When you use 60326538, you eliminate loose rivets that cause rattling or panel separation. The rivet’s large blind‑side footprint prevents pull‑through in thin sheet metal (1.5–3.0 mm thickness range).
One‑Side Installation
Blind rivet design allows fastening where only one side of the workpiece is accessible.
Corrosion Resistant
Zinc trivalent coating passes 480h salt spray, resists road salt and humidity.
Vibration Proof
Expanded body fills hole completely, preventing loosening under constant road vibration.
Precision Grip
Available grip ranges from 1.5–4.5 mm to match SANY panel thickness exactly.
Technical Specifications – OEM 60326538 Pulling Rivet
| OEM Number | 60326538 |
|---|---|
| Product Type | Open‑end blind rivet (pull type) |
| Body Material | Low carbon steel (C1008), zinc trivalent coated |
| Mandrel Material | Hardened carbon steel (45–50 HRC) |
| Nominal Diameter | 4.8 mm (body), 2.5 mm (mandrel) |
| Flange Head Diameter | 9.6 mm ±0.3 mm |
| Overall Length | 14.0 mm (standard grip range 1.5–4.5 mm) |
| Shear Strength | ≥ 4.5 kN (ISO 14589) |
| Tensile Strength | ≥ 3.8 kN (ISO 14589) |
| Corrosion Protection | 480h salt spray (ASTM B117), white rust ≤ 5% |
Why Genuine 60326538 Pulling Rivet Beats Standard Fasteners
Aftermarket rivets often use low‑grade aluminum bodies or thin steel that corrodes quickly. The genuine 60326538 rivet is manufactured with full steel construction and a controlled mandrel break notch that ensures consistent setting force. This eliminates under‑ or over‑setting that can weaken the joint. The large flange head distributes clamping pressure over a wider area, preventing sheet metal tear‑out in high‑stress areas (such as fifth wheel mounting brackets or suspension crossmembers).
SANY’s engineering team selected 60326538 for its ability to absorb shear loads during off‑road twisting and flexing. Unlike welding (which can distort panels) or bolts (which loosen over time), the pulling rivet provides a permanent, zero‑maintenance joint. Genuine rivets also feature a color‑coded mandrel (orange stripe) for easy identification. For fleet maintenance, using 60326538 ensures that repair parts match factory original specifications, preserving vehicle structural integrity.
- 100% mandrel retention after break – no loose mandrel debris
- High shear strength for structural body and chassis connections
- Sealed mandrel head prevents moisture ingress into joint
- Compatible with standard pneumatic rivet guns (3.0 mm nose piece)
- Supplied in SANY OEM boxes with traceable lot numbers
Applications – Where to Use 60326538 Pulling Rivet on SANY Trucks
| Vehicle Models | Actlon 6×4/8×4 tippers, SY331/SY412 dump trucks, SYM3310 series, concrete mixer chassis |
|---|---|
| Assembly Locations | Floor panels, sidewall sheets, aluminum toolboxes, mud flaps, trim brackets, exhaust heat shields |
| Material Compatibility | Steel‑to‑steel, steel‑to‑aluminum (with isolation washer), stainless steel |
Correct Installation of Pulling Rivet 60326538
Before installing the 60326538 rivet, drill a hole of 5.0 mm diameter (clearance) through the materials to be joined. Remove burrs and debris. Insert the rivet body fully into the hole until the flange contacts the near side. Place the rivet gun nosepiece (3.0 mm mandrel size) over the mandrel and engage. Apply steady pneumatic pressure until the mandrel breaks at the predetermined notch. The rivet body will expand to form a blind‑side bulge of approximately 9.5 mm diameter. For optimal results, set air pressure to 5.5–6.0 bar (80–87 psi).
After setting, inspect that the mandrel head has snapped flush (±0.5 mm) with the rivet head. The joint should be tight with no relative movement. Do not re‑use a rivet; always use a new 60326538 for each hole. In high‑corrosion environments (salt spreaders, coastal operation), apply a dab of zinc‑rich primer to the rivet head after installation. For SANY factory repair procedures, replace all rivets in a panel line rather than individual ones to maintain uniform clamp load. Store rivets in a dry environment; genuine packaging includes a desiccant bag.
SANY Certified
60326538 meets all original equipment fastener specifications and durability tests.
Original Packaging
Each box contains 100 rivets with batch traceability and installation guide.
Fast Global Supply
Stocked at SANY parts distribution centers for immediate shipment.
Online Catalog of SANY Parts
Learn MoreIf you have any questions about our products, services, or anything related to what we offer, please don’t hesitate to leave us a message—our dedicated team is always ready to provide prompt and helpful responses to address your concerns. What’s more, when you become our valued customer, we’re delighted to offer you complimentary catalog services, giving you access to detailed, up-to-date information on our full range of products, specifications, and offerings to help you make informed decisions.
